Application and assembly

The suction cylinder can be used as a stand alone device. This provides ease of handling and convenient transport, e.g. in a handbag.

With fly-goodbye you shall have even more fun when fully assembled with the handle. Note: The locking lever must be pressed tightly into place.

Assembling the suction cylinder with the handle is easy. The rear part of the suction cylinder is placed on the handle tappet (see first figure). The suction cylinder is swung downward and secured with the locking lever (see second figure).

fly-goodbye is also easily disassembled. Press the lower locker lever and lift the suction cylinder out of the handle.

The spare cartridges can be inserted into the three spare reservoirs. Two reservoirs are under the suction cylinder and one is in the handle (see figure below).